این پایان‌نامه‌ها در حوزه توربوماشین‌ها (کمپرسور، توربین و ...) و همچنین تست و اندازه‌گیری می‌باشد.

در ادامه، تعدادی از پایان‌نامه‌های دکتری دانشگاه ETH زوریخ و به‌ویژه آزمایشگاه تبدیل انرژی (LEC) این دانشگاه برای دانلود ارائه شده است. این فهرست به تدریج به‌ روز می‌شود.

برای دانلود می‌توانید بر روی عنوان پایان‌نامه کلیک کنید.

• Experimental Investigation of the Influence of Flow Structure on Compound Angled Film Cooling Performance (15 Mb)

• Experimental Research into Resonant Vibration of Centrifugal Compressor Blades (7 Mb)

• High Temperature Fast Response Aerodynamic Probe (5.1 Mb)

• Interaction Mechanisms Between Rim Seal Purge Flow and Profield End Walls in a Low-Pressure Turbine (15 Mb)

• A Modeling Language for Measurement Uncertainty Evaluation (5 Mb)

• Computational Aspects of Measurement Uncertainty Calculation (4 Mb)

• Full-Scale Wind Turbine Flow Field Measurements Using an Instrumented Uninhabited Aerial Vehicle (29 Mb)

• Experimental Investigation and Validation of High Cycle Fatigue Design Systems for Centrifugal Compressors (15 Mb)

• Imaging Laser Doppler Velocimetry (19 Mb)

• Loss Mechanisms in Labyrinth Seals of Shrouded Axial Turbines (4.2 Mb)

• Experimental Investigation of Film Cooling Flow Structure (15 Mb)

• Flow Structure and Stability of a Turbocharger Centrifugal Compressor (14 Mb)

• Low Coherence Interferometry In Turbomachinery and Flow Velocimetry (4 Mb)

• CFD Investigation on Inlet Flow Distortion in a Centrifugal Compressor (Master Thesis) (21 Mb)

• A 48kHz Bandwidth, 1.8mm Diameter Entropy Probe for Aerothermal Loss Measurements in Turbomachinery Flows (25 Mb)

• Sensible thermal-energy storage for adiabatic compressed air energy storage plants: Design and optimization (3.2 Mb)

• Efficiency Enhancement of a Two-stage Axial Steam Turbine With Large Hub Cavities (19 Mb)

• Local Forcing Mechanisms of Centrifugal Compressor Blades Excited by Impeller-Diffuser-Interaction (19 Mb)

• Time Resolved Flow Field and Droplet Measurements in Wet Steam Turbine Flows (17 Mb)

• Full-Scale Wind Turbine Flow Field Measurements Using an Instrumented Uninhabited Aerial Vehicle (28 Mb)

• EDM Drilling and Milling of Aerospace Materials (11 Mb)

• Efficient Simulation of Wind and Wake Flows in Wind Farms Using a Preconditioned Multistage Solver (33 Mb)

• Assessment and optimization of geological carbon storage and energy production from deep natural gas reservoirs (7.1 Mb)

• A Parallel Space-Time Solver for the Navier–Stokes Equations with Periodic Forcing (3 Mb)

• Full-scale Assessment of Impact of Unfavourable Upstream Conditions on the Performance and Loads of Wind Turbines (32 Mb)

• Acoustic damping and aeroacoustic instabilities of cavities subject to bias and grazing flows (13 Mb)

• Double modulation pyrometry with emissivity correction: A radiometric method to determine the temperature of radiatively heated surfaces (33 Mb)

• Concept Development for Hydrogen Methane Mixtures Combustion for Reduced Emissions (47 Mb)

• Online Feedback Optimization for Gas Compressors (7.1 Mb)

• Vibration of Rotor–Stator Systems Coupled by Viscous Liquids (10 Mb)

• Design of spatial and time resolved plasma diagnostics for small gap discharges (8 Mb)

• Energy and Spin Resolved Scanning Field Emission Microscopy and a New Instrument for Low Temperature Imaging (45 Mb)

• Entropic Lattice Boltzmann Method for Complex Flows (25 Mb)

• Low-Complexity Numerical Methods for Nonlinear Model Predictive Control (2 Mb)

• Microstructurally-Based Modelling of Primary Creep Regeneration (21 Mb)

• Local Forcing Mechanisms of Centrifugal Compressor Blades Excited by Impeller-Diffuser-Interaction (18 Mb)

• Investigation of the Heat Transfer Patterns on the Vane Endwall of an Axial Turbine (80 Mb)

• Sensible thermal-energy storage for adiabatic compressed air energy storage plants: Design and optimization (3 Mb)

• Turbine Design Optimizations using High Fidelity CFD (27 Mb)

• Steam turbine aerodynamics and geometry optimization for effective reduction of leakage flow interactions (55 Mb)

• In-situ measurement of blade heat transfer coefficients and gas recovery temperature (9 Mb)

• Aerothermal optimization of partially shrouded axial turbines (30 Mb)

• Cooling Flow Effects on Rotor Heat Transfer Distribution in Highly Loaded Axial Turbines (62 Mb)

• Hydraulic Characteristics and Flow-field Related Hemocompatibility of Rotary Blood Pump Designs (7.2 Mb)

• Aerothermal Effects of High-Pressure Turbine Rim Seals and Blade Tip Geometries in the Presence of Cooling Flows (30 Mb)

• Improvement of Transonic Low Pressure Steam Turbine using High Performance Computation (44 Mb)

• Aeromechanical Challenges of Shrouded Low Pressure Turbines for Geared Turbofan Engines (34 Mb)

• Unsteady Steam Turbine Optimization using High Fidelity CFD (42 Mb)

• Infrared Thermography for Endwall Heat Transfer Measurements (50 Mb)

• Design and testing of a high through flow fan for a high altitude application (27 Mb)

• The effect of wakes on leading edge loss (Master Thesis) (20 Mb)
  
  

Rights / license: In Copyright - Non-Commercial Use Permitted